Zoeller 1/2 HP Shark Sewage Grinder System (18" x 30") with High Water Alarm

Zoeller Model 915 is a preassembled grinder pump package that comes with all of the key components required for installation. It is ideal for those looking to install a job ready sewage ejector system. Purchasing a job ready package reduces installation errors while minimizing cost. The Model 915 grinder pump package is designed for burial flush-to-grade. The access cover is the only part that is visible after installation. The package comes preassembled in an 18" x 30" poly molded basin. It includes Zoeller Model 801 grinder pump. The Model 801 is a 1/2 HP grinder pump. The grinder pump reduces solids to an 1/8" or less as they pass through the cutter and cutter plate. This allows for the use of a smaller line size during installation. This is often necessary in areas with shallow bedrock or hilly terrain. The basin comes complete with an 1-1/4" PVC discharge pipe that includes a predrilled 3/16" weep hole to prevent the pump from becoming airlocked. The basin's cover includes a cord seal for the pump's electrical cord along with a predrilled 2" vent hole. Additionally, the cover includes a twist-to-lock observation port for inspections and float access. The basin also ships with a clear construction cover to protect the basin lid while doing finish work around the basin cover. The cover is sealed in place prior to shipment. The pre-plumbed 4" inlet hub makes for a quick connection to the main sewage line. Job ready, fast, and easy installation!

Features:

• Primary pump: Model 801 Shark Series grinder pump cuts solids into a slurry using the industry proven "scissor like" Tri-Slice ® cutter technology that includes a rotating cutter cutting against the stationary cutter plate reducing solids down to 1/8". The pump includes a powder-coated epoxy finish which provides corrosion-resistance and extends the pump's life in harsh sewage environments and is 100% factory tested before being installed in the basin
• The pump's 115 V electrical cord seal is sealed in the cover
• The single piggyback pump switch is installed 180° from the 4" inlet to prevent the float from being affected by the inflow of raw sewage
• Discharge pipe is plumbed with a pre-drilled 3/16” weep hole to prevent the pump from becoming air locked
• Includes a 10-4012 APAK® Indoor Alarm
• The simplex steel cover comes sealed and bolted down so the system is water and gas tight eliminating the escape of any odor
• 1-year limited warranty: this model comes with warranty coverage from Zoeller Pump Company, giving you extra protection and more peace of mind

Specifications:

• Horsepower: 0.5
• Impeller Material: Engineered Plastic
• Discharge Diameter: 1-1/4"
• Maximum Head Height: 26 ft
• Amperage: 7