

Zoeller 912 Simplex 18" x 30" Fiberglass Sewage Package System with BN267 Pump (10' Stack)
Model: 912-0020|Item: bci4004947
Details
Zoeller's model 912 is a preassembled sewage ejector package that comes with all of the key components required for installation. It is a higher head and higher flow package when compared to the 912-0007 with the model 264. It is ideal for those looking to install a job-ready sewage ejector system. Purchasing a job-ready package reduces installation errors while minimizing cost. The model 912 sewage ejector package is designed for burial flush-to-grade. The access cover is the only part that is visible after installation. The package comes preassembled in an 18" x 30" fiberglass basin. It includes Zoeller's model BN267 automatic sewage pump. The model 267 is a 1/2 HP pump. The vortex impeller design of the model 267 allows the pump to pass 2" spherical solids limiting the potential for clogging and unwanted downtime. The basin comes complete with a 2" PVC discharge pipe that includes a predrilled 3/16" weep hole to prevent the pump from becoming airlocked. The basin's cover includes a cord seal for the pump's electrical cord along with a predrilled 2" vent hole. The cover is sealed in place prior to shipment. The pre-plumbed 4" inlet hub makes for a quick connection to the main sewage line. Each basin is filled with environmentally friendly packing peanuts prior to shipment to ensure things remain in place during transit. The packing material is water soluble, so it will disappear on the first use. Job ready, fast, and easy installation!
Features:
- 10' stack test to L.A. code
- The model 267 sewage pump is built with an engineered plastic base and vortex impeller capable of handling 2" spherical solids reducing the chance of clogs and downtime
- The pump's 115 V electrical cord seal is sealed in the cover
- The single piggyback pump switch is installed 180° from the 4" inlet to prevent the float from being affected by the inflow of raw sewage
- The cover comes sealed and bolted down so the system is water and gas tight eliminating the escape of any odor
- As with all Zoeller pumps, the model 267 is 100% factory tested
- 3-year limited warranty: this model comes with warranty coverage from Zoeller Pump Company, giving you extra protection and more peace of mind
Specifications
Dimensions and Measurements
Basin Size | 18" x 30" |
Cord Length | 15 ft. |
Cord Length (ft) | 15 ft. |
Diameter | 18 in. |
Discharge Diameter | 2 in. |
Flow Rate by Feet of Head | 115 gal / 5 ft, 45 gal / 15 ft, 85 gal / 10 ft |
Maximum Head Height | 20.5 ft. |
Dimensions and Measurements
Basin Size | 18" x 30" |
Cord Length | 15 ft. |
Cord Length (ft) | 15 ft. |
Diameter | 18 in. |
Discharge Diameter | 2 in. |
Flow Rate by Feet of Head | 115 gal / 5 ft, 45 gal / 15 ft, 85 gal / 10 ft |
Maximum Head Height | 20.5 ft. |
Characteristics and Features
Base Material | Iron |
Float Type | Tether Switch |
Handles Solids | Yes |
Housing Material | Cast Iron |
Impeller Material | Engineered Plastic |
Manual Override | Yes |
Material Shaft | Steel |
Pump Material | Cast Iron |
Switch Type | Automatic |
Characteristics and Features
Base Material | Iron |
Float Type | Tether Switch |
Handles Solids | Yes |
Housing Material | Cast Iron |
Impeller Material | Engineered Plastic |
Manual Override | Yes |
Material Shaft | Steel |
Pump Material | Cast Iron |
Switch Type | Automatic |
Electrical and Operational Information
Amperage | 9.4 |
Frequency | 60 Hertz |
Horsepower | 0.5 |
Voltage | 120 |
Electrical and Operational Information
Amperage | 9.4 |
Frequency | 60 Hertz |
Horsepower | 0.5 |
Voltage | 120 |
Warranty and Product Information
Commercial Warranty | 3 Year |
Country Of Origin | USA |
Made in America | Yes |
Manufacturer Warranty | 3 Year Limited |
Warranty and Product Information
Commercial Warranty | 3 Year |
Country Of Origin | USA |
Made in America | Yes |
Manufacturer Warranty | 3 Year Limited |