Zoeller Model 201 Qwik Jon Premier Upflush Bathroom Grinder Pump with 6' Cord 115V and 1PH

The Model 201 Qwik Jon Premier is a true upflush grinder pump system for full bathroom installations. Avoid breaking concrete and install a bathroom anywhere. The Qwik Jon Premier allows you to install an upflush toilet system in an area where gravity drainage is not accessible or cost prohibitive. Breaking concrete to install a bathroom can be costly. Its messy. Additionally, there is the potential for damage to the structural integrity of the home or building. The Qwik Jon Premier is a perfect alternative to overcoming those challenges. At the heart of the Qwik Jon Premier is a 1/2 HP grinder pump. Because of the grinder pump's cutting capability, it is a good choice for residential or public restroom applications. It does not require a gravity drain, so it is a convenient option for above-grade bathroom installations on the ground floor or in basements. You’ll appreciate the speed and ease of a Qwik Jon Premier installation. You can easily connect the Qwik Jon Premier to tubs, showers, sinks, or any other bathroom fixtures. It can be installed as a freestanding unit behind a toilet or placed behind a wall with the use of Zoeller extension kit. If you're looking to install a bathroom in an unfinished basement, workshop, warehouse, or any other area lacking pre-plumbed gravity drainage, look no further than the Qwik Jon Premier.

Features:

• For use in residential or light commercial upflush applications
• Snap fit lid allows the pump and float switch to be accessed without removing a single screw
• Collects and removes unwanted water from all fixtures including toilets, tubs, sinks, showers, faucets, and more
• Discharge elbow with a threaded union connection and built-in check valve
• Easily connects to a tub, shower, sink or other fixtures with 2" NPT or 1-1/2" slip side inlets
• Fits right behind our rear outlet toilet or choose a discrete installation behind the wall in an adjacent utility room
• Tri-Slice® Cutter Technology - three independent cutting channels provide over 250,000 cuts per minute
• Non-clogging vortex impeller for reliable operation
• Recessed side handles for carrying and installation, hidden side inlets when not in use
• 1" discharge elbow with built-in check valve

Specifications:

• Horsepower: 0.3
• Impeller Material: Engineered Plastic
• Discharge Diameter: 1"
• Maximum Head Height: 25 ft
• Amperage: 9