

Zoeller Model 152 Float Switch Effluent Pump 0.40 HP, 115V
Model: 152-0017|Item: bci5108342
Details
Model BN152 Effluent Pump is designed to remove unwanted water in septic effluent applications. It is an ideal choice in high pressure or high flow applications. The professional-grade, 4/10 HP Model 152 is known for its dependability. The BN152 is a nonautomatic pump equipped with a single piggyback float switch. The piggyback float switch allows you to set the on and off point of the pump in the field. This is ideal in an application with a deep sump pit or pump tank. The Model 152’s switch case, motor housing, and pump housing are each constructed of cast iron. The corrosion resistant engineered plastic vortex impeller has a smooth surface allowing water and solids to pass freely through the pump. The pump’s identification tag, handle, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 152 is able to withstand the most demanding applications. Every pump is submerged in water and tested to its published performance curve, ensuring it meets expectations and delivers peace of mind right-out-of-the-box.
Zoeller 152-0017 Features:
- Oil filled motor optimizes heat dissipation which prevents the pump from overheating during extended-use occurrences
- Nonautomatic pump with piggyback variable level float switch, which allows you to adjust the on / off level for optimal runtime
- Built with an engineered plastic vortex impeller to allow free passage of 3/4” spherical solids to prevent the potential for clogging
- Powder-coated epoxy finish provides corrosion-resistance and extends pump life in harsh environments
- Stainless steel screws, bolts, and handle to prevent rust and corrosion even when installed in an elevator sump pump application
- 100% Factory Tested - every pump is submerged in water and tested at the factory to ensure that it performs as expected when you receive it
- Comes with a 3-year limited warranty giving you protection over your investment and the peace of mind you expect in a quality product
Zoeller 152-0017 Specifications:
- Amperage: 8.5 A
- Cord Length: 25'
- Discharge Diameter: 1.5"
- Frequency: 60 Hz
- Horsepower: 0.4 Hp
Manufacturer Resources
specification sheetDimensions and Measurements
Cord Length | 25 in. |
Discharge Diameter | 1.5 in. |
Maximum Head Height | 38 in. |
Dimensions and Measurements
Cord Length | 25 in. |
Discharge Diameter | 1.5 in. |
Maximum Head Height | 38 in. |
Characteristics and Features
Impeller Material | Plastic |
Material Shaft | Steel |
Characteristics and Features
Impeller Material | Plastic |
Material Shaft | Steel |
Electrical and Operational Information
Amperage | 8.5 |
Electrical Phases | 1 |
Frequency | 60 Hertz |
Horsepower | 0.4 |
Maximum Fluid Temperature | 130 °F |
Motor RPM | 3450 |
Electrical and Operational Information
Amperage | 8.5 |
Electrical Phases | 1 |
Frequency | 60 Hertz |
Horsepower | 0.4 |
Maximum Fluid Temperature | 130 °F |
Motor RPM | 3450 |
Warranty and Product Information
Country Of Origin | USA |
Manufacturer Warranty | 3 Years |
Warranty and Product Information
Country Of Origin | USA |
Manufacturer Warranty | 3 Years |