WarmlyYours 40' PRO-Tect DIY Plug-in Heating Cable Kit for Pipes, Constant Wattage (7W/ft), 120V

A burst water pipe in the dead of winter can be a huge inconvenience and completely replacing the insulation needed to prevent pipes in perimeter walls and crawlspaces from freezing can be cost-prohibitive. To keep your most vulnerable pipes from freezing, the simple and DIY-friendly solution is to install a PRO-Tect heating cable for pipes. This 40' long 120 V plug-in heating cable generates heat (7 watts per linear foot) which will keep your pipes from freezing in low temperatures. The integrated thermostat control, located between the non-heating lead cable and the heating wire itself, will ensure a consistent temperature while minimizing energy use. The thermostat turns the heating cable on when exposed to temperatures below 37.4°F (3°C). It will shut the heating cable off when the pipe has been heated to a temperature of approximately 50°F (10°C).

Features:

• This 40' cable is great for 3/8” – 3/4" diameter pipes up to 42’ long and 1” – 1 1/2” diameter pipes up to 40’ long?
• Easy plug-in operation with indicator light and integrated thermostat
• Stops pipes from freezing at temps as low as -40°F/-40°C
• 7 watts per linear foot (constant wattage)
• Safe: cUL Listed, CSA Listed, and cETLus Listed

Specifications:

• Cable Length: 40'
• Voltage: 120V
• Amperage: 2.33A
• Wattage: 280