TCERDirect 9W Generator Copper Cable, 3 x #1 AWG Conductors, #6 Ground, 9 x #18 Control Conductors - 110 Ft.

This 9-wire generator power and control cable is engineered for dependable standby generator installations, combining power, grounding, and control conductors into a single cable for a cleaner, more efficient installation. Constructed with soft-drawn bare copper conductors, it delivers reliable electrical performance for residential and commercial backup power applications.

Each conductor features heat- and moisture-resistant PVC insulation with a durable nylon jacket for added protection during installation. The cable is wrapped with a Mylar binder tape and finished with a rugged PVC outer jacket to provide long-lasting durability in demanding environments. Rated for 600 volts, this cable is designed for use in cable tray, aerial, and direct burial installations.

Features:

• Combines power, grounding, and control conductors in one cable
• Heat- and moisture-resistant PVC insulation with durable nylon jacket on each conductor
• Heavy-duty PVC outer jacket with integrated ripcord for easier installation
• Sunlight resistant and oil resistant for indoor and outdoor use
• Suitable for cable tray, aerial, and direct burial applications

Components:

• A) (3) - #1 AWG Class B (19 strand), soft drawn, bare copper circuit conductors with 50 mils (1.27 mm) heat and moisture resistant, polyvinyl chloride (PVC) insulation and jacketed with 7 mils (0.18 mm) nylon applied directly to the surface of the insulation
• B) (9) - #18 AWG Class K stranded, soft drawn, bare copper conductors with 15 mils (0.38 mm) heat and moisture resistant, polyvinyl chloride (PVC) insulation and jacketed with 4 mils (0.10 mm) nylon applied directly to the surface of the insulation
• C) (1) - #6 AWG Class C (19 strand), soft drawn, bare copper grounding conductor with 30 mils (0.76 mm) heat and moisture resistant, polyvinyl chloride (PVC) insulation and jacketed with 5 mils (0.13 mm) nylon applied directly to the surface of the insulation
• D) Mylar binder tape
• E) 80 mils (2.03 mm) of heat and moisture resistant, polyvinyl chloride (PVC) jacket. A ripcord shall be placed underneath the jacket