Speakman Eyesaver 1.5 GPM Single Hole Laboratory Faucet with Integrated Eyewash and 4" Wrist Blade Handles

Speakman SEF-1850-4WH Faucet Features:

• Covered under Speakman's 3 year limited warranty
• Faucet body constructed of brass
• Brass is highly resistant to corrosion and an excellent choice to withstand high temperatures
• Single hole installation
• Dual wrist blade handles control the flow and temperature of water
• Faucet includes ceramic disc rough in valve
• Drain assembly not included
• Low lead compliant

Speakman SEF-1850-4WH Eye Wash Features:

• Eye wash outlets constructed of brass
• Brass is highly resistant to corrosion and an excellent choice to withstand high temperatures
• Aerated sprays with dust caps
• Lift handle activates water flow

Speakman SEF-1850-4WH Specifications:

• Height: 8-7/8" (deck to top of faucet)
• Spout Height: 5-1/4" (deck to spout outlet)
• Spout Reach: 5-1/2" (faucet base to spout outlet)
• Eye Wash Flow Rate: 2.8 gallons-per-minute
• Faucet Flow Rate: 1.5 gallons-per-minute
• Maximum Deck Thickness: 2"
• Hole Size: 1-1/4"
• Holes Required: 3
• Connection Size: 3/8"

Product Variations:

• SEF-1850: Faucet with Integrated Eye Wash
• SEF-1850-4WH (This Model): Faucet with Integrated Eye Wash and 4" Wrist Blade Handles
• SEF-1850-4WH-NA-TW: Non-Aerated Faucet with Integrated Eye Wash and 4" Wrist Blade Handles and Thermostatic Mixing Valve
• SEF-1850-8-NA: Non-Aerated 8" Faucet with Integrated Eye Wash
• SEF-1850-8-ST: 8" Faucet with Integrated Eye Wash and Serrated Tip with Vacuum Breaker

About This Product:

In the event of a chemical eye burn, panic ensues. Our senses are rendered and instinct naturally takes over. Our reflexes instantly rush us to the nearest location of relief-the sink, safety showers, eyewash stations, etc. However, with the introduction of "faucet-mounted" eyewash stations, victims can inadvertently flush scalding-hot water into their eyes in a moment of confusion, causing more harm than good. Speakman Eyesaver Single Post Laboratory Eyewash Faucets, are a revolutionary product line that combines a single post lab faucet with an independently operated eyewash. With a simple pull of the lever, water will instantly flush into the eyes of a burn victim. Two separate water supplies ensure that cold to tepid water will bring relief to the victim, regardless if hot water is being run from the sink simultaneously. The single-post mount design will save valuable laboratory counter space and require no additional space to be installed. Eyewash features 2 GPM flow rate at 30 PSI while faucet features 1.5 GPM flow rate. Certified to ANSI/ISEA Z358.1, ASME A112.18.1/CSA B125.1, NSF 61 & NSF 372.