Schlage Double Cylinder Camelot Handleset with Siena Interior Knob from the F-Series

Two keys will be shipped per lock. Three or more items keyed alike will ship a total of 6 keys

Schlage F62-CAM-SIE Double Cylinder Entrance Handleset with Interior Siena Knob from the Camelot Collection

The distinctive design of the Camelot combines architectural inspired arches with graceful curves. The two-piece design offers flexibility for doors with non-standard hole locations while providing a classic appearance for smaller entrance ways.

• Camelot double cylinder handle set with Siena Interior Knob
• The deadbolt is thrown or retracted by a key from either side.
• Door latch is retracted by a thumb piece from the outside or by the inside lever
• Bolt automatically deadlocks when it is fully thrown.
• Installation should be in accordance with existing codes only, to ensure life safety emergency egress.
• For Right or Left handed applications
• Solid Brass Exterior Trim
• Wrought Brass Interior Trim
• Lifetime Limited Mechanical and Finish Warranty
• Exterior Handleset Height: 12-7/8" without the deadbolt
• Exterior Handle Projection: 2-7/8"
• Interior Knob Diameter: 2-9/16"
• Interior Rose Diameter: 2-3/4"
• Interior Knob Projection: 2-3/8"

Deadbolt Features:

• Utilizes the new B-Series deadbolt with increased security and easier installation!
• 1/2" of bolt left in housing when bolt is thrown for added kick-in resistance.
• Integrated anti-pick shield with Snap and Stay self adjusting tension provides added security and simplifies installation
• 1" Edge bore door preparation required for larger bolt housing
• Zinc bolt has hardened steel pin inside that spins in response to sawing attacks which prevents cutting or sawing
• Bolt diameter is 10% larger than typical bolts for maximum kick-in resistance
• Adjustable backset with the industry's only helical design that locks into place with no adjusting during installation
• Works for both 2-3/8" and 2-3/4" backsets.
• ADA compliant thumb turn
• Faceplates (Part 12-326): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates
• Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4" x 1-5/8"

Note: New interior packs will not work with old exterior packs. New exterior handlesets will not work with old interior packs.

Model Conversions:

• Old F358 - New F58
• Old F359 - New F59
• Old F362 - New F62
• Old F392 - New F92
• Old F394 - New F94