Pressure-Pro Pressure-Pro Fully Plumbed CAT 4000 PSI 4 GPM (Solid Shaft) Triplex Pressure Washer Pump w/ Plumbing Kit (Belt Drive)

Product Information:

• Why Repair A Worn Out Pump?
  • Fully Plumbed are ready to go - 4 bolts off - 4 bolts on.
  • Get a great quality replacement assembly for less than a repair
  
  
• CAT Brand Pump Kit Is Ready To Install
  • Comes with unloader, pressure relief valve, siphon tube,
  • Pressure hose quick connect plug, & garden hose inlet w/ filter
  
  
• Concentric Solid Ceramic Plungers
  • Ceramic runs cooler, lasts longer; assures true wear surface
  • Forged brass manifolds for strength and corrosion resistance
  • Lubricated Lo-Pressure seals provide double protection against external leakage
  
  
• Quality Materials
  • Die cast aluminum crankcase provides high strength
  • V-Packings offer unmatched performance and seal life
  • 304 stainless steel valves and seats are hardened and polished for ultimate seating and extended valve life
  
  
• Integral VRT310 Pressure Unloader
  • Standard built-in bypass controls pressure & protects the pump
  • 1/4" fixed chemical injector hose barb & siphon hose
  • Allows addition of pressure washer safe soap to the water flow
  
  
• 20 MM / .787" Solid Shaft
  • Runs at a low 1460 RPM Maximum
  • Plunger bore .630 in. / 16 mm, plunger stroke .709 in / 18mm
  
  
• Be Sure To Measure Flange Bolt Holes & Shaft Accurately!
  • There is a 25% restocking fee on returned pumps
  • See the Owner's Manual (under the Specs tab) for dimensions
  • There is a 25% restock fee on returned pumps
  
  
• Please Call Us For Sizing Assistance w/ Information Below:
  • 1. Age of Pump and Model # (must be no more than 15-yrs old)
  • 2. Is the pump Vertical or Horizontal
  • 3. Shaft Size - 3/4", 7/8" (vertical ONLY), 1", or Belt Drive XXmm
  • 3. Shaft Size - 3/4", 7/8" (vertical ONLY), 1", or Belt Drive XXmm
  • 4. Engine Brand and HP (model # if available would be helpful)
  
  
• ***Shaft Size Measurements Must Be Precise***

Specifications:

• Fuel Type: Gas
• CARB Approved
• Warranty: 2 Year Consumer

Dimensions:

• Height: 5-3/4"
• Width: 10"
• Length: 10-3/8"
• Product Weight: 18 lbs
• Outflow Connection: 3/8" Snap Coupler (Male)