Shipping to:Chico, CA
Myers 1/3 HP Cast Iron High Temp Effluent Pump with Tether Float Switch
Model: S40HT-11P-01|Item: bci5171624
Details
Features:
- Myers S40HT Series High Temperature Automatic Effluent Pump: For Boiler blow down pits, condensate pits and hot water sumps
- Cast Iron Housing, Volute Case and Impeller: Resists the most extreme corrosive environments
- Wide Angle, High Temperature Tether Float Switch: Piggyback plug design, Control panel NOT required
- 1/3 HP PSC Motor (12-Amps): No starting switches or relays to wear out
- Oil-Filled Motor w/ Thermal Overload Protection: Allows the pump to run cooler and prevents overload damage
- Non-Clog, Vortex Impeller Design: Allows this pump to pass solids up to 3/4" and prevents clogging
- Long-Life Carbon/Ceramic Shaft Seal: Buna-N elastomers and stainless steel parts for added protection
- Stainless Steel Fasteners: Allows easy disassembly after extended service
- Heavy-Duty Lift-Out Ring: Makes this pump easy to install/remove from basin
- 2-Year Limited Warranty
Specifications
Dimensions and Measurements
Cord Length | 20 ft. |
Cord Length (ft) | 20 ft. |
Discharge Diameter | 1.5 in. |
Flow Rate (GPM) | 45 |
Dimensions and Measurements
Cord Length | 20 ft. |
Cord Length (ft) | 20 ft. |
Discharge Diameter | 1.5 in. |
Flow Rate (GPM) | 45 |
Characteristics and Features
Base Material | Iron |
Float Type | Tether Switch |
Housing Material | Cast Iron |
Impeller Material | Cast Iron |
Manual Override | No |
Characteristics and Features
Base Material | Iron |
Float Type | Tether Switch |
Housing Material | Cast Iron |
Impeller Material | Cast Iron |
Manual Override | No |
Electrical and Operational Information
Amperage | 12 |
Horsepower | 0.33 |
Voltage | 120 |
Electrical and Operational Information
Amperage | 12 |
Horsepower | 0.33 |
Voltage | 120 |
Warranty and Product Information
Commercial Warranty | 2 Year |
Manufacturer Warranty | 2 Year |
Warranty and Product Information
Commercial Warranty | 2 Year |
Manufacturer Warranty | 2 Year |
Reviews
(0)