How to Replace a Toilet Valve

Replacing a leaky or screaming toilet valve may seem a little intimidating, but reality is, it’s a DIY job anyone can do. Using just a few basic tools, you’ll have your toilet running normally in no time.

Step 1

Turn off the water supply.

Step 2

Drain water from the tank by holding down the toilet lever.

Step 3

Using the pliers, remove the water supply line. Place the bucket beneath the water supply line to catch any excess water that drips out.

Step 4

Remove the valve nut that holds the valve in place.

Step 5

Remove the old valve.

Step 6

Assemble the new universal valve. Make any necessary adjustments to the new valve.

Step 7

Install new valve and attach it with the new nut.

Step 8

Reconnect the water supply line. Then connect the fill hose.

Step 9

Turn the water supply back on.

Step 10

If necessary, fine-tune the water level by adjusting the flow with your screwdriver.