Hansgrohe Tecturis S 1.2 GPM Single Hole Bathroom Faucet with Pop-Up Drain Assembly

The Tecturis S 110 single lever faucet with CoolStart and drain assembly turns water into an experience. Give water a striking shape with the compact Tecturis S 110 CoolStart bathroom faucet from Hansgrohe. Tecturis S impresses with a purist design that has clear lines and rounded shapes. At the same time, the bathroom faucet combines an attractive appearance with maximum comfort. This turns the use of water into a new aesthetic experience every day. The water is enriched with air, giving fewer water splashes and an incomparably pleasant feeling on the skin. The extra wide spray looks like a small waterfall and suits the cubic design well (WaterfallStream). When the lever is in the middle position, only cold water flows.

Hansgrohe 73314 Features:

• Covered under Hansgrohe's limited lifetime warranty
• Faucet body constructed of brass
• Brass is highly resistant to corrosion and an excellent choice to withstand high temperatures
• Coordinates with products from the Tecturis S line
• Single hole mounting type
• Deck mounted installation - single hole faucet mounts directly to sink or countertop
• Single lever handle controls the flow and temperature of water
• Faucet includes cartridge valve
• Pop-up drain assembly included
• Complies with ADA standards
• Included in box: single lever bathroom faucet, connection hoses, mounting hardware, assembly instructions
• Easy to install: the faucet is attached to the water connections via flexible connection hoses (3/8-inch)
• Tried-and-tested: the pop-up drain is included in the box and can be conveniently opened and closed with one hand

Hansgrohe 73314 Technologies and Benefits:

• EcoRight: Hansgrohe faucets and showers fitted with EcoRight technology require up to 60% less water than conventional products – and without any loss of comfort. Lower hot water consumption means lower energy requirements

• AirPower: The principle is simple: an ample supply of air is sucked in via the spray disc of your AirPower shower. The incoming water is infused with this air. Around three liters of air are transferred to one liter of water. Valuable water is thus used efficiently

• CoolStart: When using CoolStart technology from Hansgrohe, only cold water flows when the handle is in the center position. In contrast to standard faucets where the continuous flow heater or circulation pump starts immediately when in the center position, the pipes are not filled unnecessarily with hot water when using CoolStart faucets. Hot water is added when the handle is turned to the left. You decide how high the temperature should be. The handle cannot be moved to the right

Hansgrohe 73314 Specifications:

• Height: 7-1/4" (deck to top of faucet)
• Spout Height: 4-1/8" (deck to spout outlet)
• Spout Reach: 4-5/8" (faucet base to spout outlet)
• Flow Rate: 1.2 gallons-per-minute
• Maximum Deck Thickness: 1-5/8" (cannot mount on thicker decks)
• Faucet Holes: 1 (minimum number of holes required for installation)