Halsey Taylor Wall Mounted Single Station Indoor Water Fountain Cooler - Barrier Free

Halsey Taylor HAC8FSQADA Features:

• Covered under Halsey Taylor's 5 year limited warranty on any refrigeration systems or 12 month limited warranty for electrical/water system components
• Single station drinking fountain
• A cleanable strainer screen is provided to trap waterborne particulate of 140 microns or bigger prior to entering the cooler
• Front and side self-closing light-touch push-bars with raised letters for the visually impaired
• Valve with built-in flow regulator to provide constant stream from 20 to 105 psi water pressure
• Barrier-free drinking station complies with ADA regulations

Halsey Taylor HAC8FSQADA Construction:

• 300 series nickel bearing stainless steel basin polished to a lustrous satin finish
• Contoured basin offers large area to minimize splashing when in use
• Stainless Steel Basin - One piece basin has integral drain grid, embossed bubbler pad. No exposed fasteners
• Frame furnished to allow flush mounting to finished wall
• Vandal-resistant bubbler is one-piece with chrome plating

Halsey Taylor HAC8FSQADA Cooling System:

• Motor Compressor - Hermetically sealed, reciprocating type, single phase. Sealed in lifetime oil supply. Equipped with electric cord and three prong molded rubber plug
• Condenser - Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated
• Cooling Unit - Combination tube-tank type. Tube portion is continuous coil of copper tubing. Fully insulated with EPS foam (UL listed for self-extinguishing material)
• Refrigerant Control - Refrigerant type HFC-134a is controlled by accurately calibrated capillary tube for positively trouble free performance
• Temperature Control - Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements

Halsey Taylor HAC8FSQADA Specifications:

• Base Cooling Capacity (GPH): 8
• Rated Watts: 370
• Full Load Amps: 4
• Fountain Type: Refrigerated
• Installation: Wall Mounted
• Voltage: 115
• Height: 26-3/10" (base to top of fixture)
• Length: 20-2/5" (left to most right rim of fixture)
• Width: 20-1/5" (back to front of fixture)