Gaggenau 400 Series 15 Inch Wide 2 Burner Electric Cooktop with Clean and Keep Warm Setting

Features:

• Hard chrome-plated surface for teppan cooking and use as griddle, grill, searer and warming plate. No pots or pans necessary
• Exact temperature control up to 480 °F, with warming and cleaning settings
• Optimum heat distribution
• Solid stainless steel control knobs
• Precision crafted 3mm stainless steel frame
• For surface-mount installation with a visible edge or for flush installation
• Can be perfectly combined with other Vario 400 series appliances
• Electronic temperature control from 120 °C to 240 °C
• Two zones, each 1500 W, can be operated together as a complete surface or each half separately
• Keep warm setting
• Cleaning setting
• Simple to clean surface

Safety:

• Safety shut-off
• Pre-heat and residual heat indicator

Planning notes:

• Depending on the type of installation — surface-/ or flush-mounted, with or without cover — the specific location of the control knob positions may vary
• If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided
• The bearing capacity and stability in the case of thin countertops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads
• Flush installation is possible in countertops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the edges must be observed. For other materials, please consult with your countertop manufacturer
• The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining
• The joint width may vary due to size tolerances of the combinations and of the countertop cut-out
• If installing several appliances in individual cut-outs allow for a division bar of minimum 1-31/32" (50 mm) between the individual cut-outs
• A minimum lateral clearance of at least 40 mm from adjacent heat-sensitive furniture or contact surfaces must be observed or thermal insulation fitted
• Appliance can be snapped into the worktop from above
• Appliance weight: approximately. 12 kg.
• Plan for a 59-1/16"connecting cable

Specifications:

• Number of Burners: 2
• Fuel Type: Electric
• Hot Surface Indicator Lights: Yes
• Cutout Depth: 19-3/8"
• Cutout Width: 14.1875, 15.125"
• Depth: 20-1/2"
• Height: 4-5/8"
• Width: 14-15/16"
• Amperage: 16A
• Voltage: 208, 240V