Elkay 8 GPH ADA Wall Mount Single Level Hands Free Water Cooler

Elkay 8 GPH ADA Wall Mount Single Level Hands Free Water Cooler

Elkay is sure to have a water cooler or drinking fountain that will meet or exceed your specifications.

Product Features:

• Self-contained wall hung water cooler
• Electric refrigerated
• Capacity of 50°F drinking water, based upon 80°F inlet water and 90°F ambient
• Sensor operated has unique Hands-Free operation
• Valve with built-in flow regulator to provide constant stream from 20 to 105 psi water pressure
• Non-pressurized Stainless steel cooling tank system is standard
• Non-pressurized water tank is located after bubbler valve (so that tank is subject to line pressure only when valve button is pressed)
• ADA compliant
• No lead design
• Construction
  • Electronic Sensor Hands-Free Operation - On-off solenoid valve is actuated by an infrared light beam sensor. No physical contact with cooler is required. Built in time delay, maximum 30 second running time. Sensor range is adjustable
  • Frame - Galvanized structural steel chassis supports refrigeration system and fastens to wall. Provides increased structural integrity and rigidity to cooler
  • Stainless steel Basin - One piece basin has integral drain grid, embossed bubbler pad. No exposed fasteners
  • Exclusive Flexi-Guard Safety Bubbler - Innovative design utilizes a pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position
  • Upper Shroud - Contoured shock-absorbing, provides additional protection against accidental injury. No exposed fasteners
  • Lower Shroud - One piece easy to remove and replace. Allows access to internal components from three sides
  • Wall mounting Frame - MF200 frame furnished with each unit. Frame allows flush mounting to finished wall
• Cooling System
  • Motor Compressor - Hermetically sealed, reciprocating type, single phase. Sealed in lifetime oil supply. Equipped with electric cord and three prong molded rubber plug
  • Condenser - Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated
  • Cooling Unit - Combination tube-tank type. Tube portion is continuous coil of copper tubing. Fully insulated with EPS foam (UL listed for self-extinguishing material)
  • Refrigerant Control - Refrigerant type HFC-134a is controlled by accurately calibrated capillary tube for positively trouble free performance
  • Temperature Control - Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements

Product Specifications:

• Base Flow Rated: 8.0
• Rated Watts: 370
• Full Load Amps: 4.0
• Fountain Type: Cooler
• Shipping Weight: 56 lbs
• Installation Type: Wall
• Hands Free Operation: Yes
• Voltage: 115V/60Hz
• Height: 18-13/16"
• Width: 18-3/8"
• Depth: 19"
• Foot Pedal: No
• Glass Filler: No
• Filtered: No