Design House Ironwood Passage Door Lever Set with Round Rose

The Design House 755413 Ironwood 2-way latch passage door handle is best suited for bedrooms or closets and does not lock. This handle is designed for left or right hand doors and fits the two most common backsets in the U.S. (2-3/4-inch and 2-3/8-inch). The 1/2-inch latch bolt is plated in nickel and does not budge once in place. The lever does not include keyed cylinders. Use this handle on standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch by 2-1/4-inch radius corner face plate. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. This product is ANSI Grade-3 certified, which means this handle is rated for residential security. Designed and manufactured by Design House, the trusted source for quality lighting, hardware, plumbing, kitchen, and bath products for every taste and budget.

Passage: Passage door hardware has no locking mechanism. Both the interior and exterior handles are always free making it perfect for hallways, closet doors, and anywhere else a lock isn't needed. Passage door hardware can also be used in conjunction with a deadbolt to secure a back door or entrance.

Features:

• Tested to exceed ANSI/BHMA Grade 3 security requirements
• Constructed of solid brass for durability and dependability
• Installs easily with all necessary mounting hardware included
• Covered by Design House's 5 year limited manufacturer warranty

Specifications:

• Backset: Adjustable 2-3/8" or 2-3/4"
• Cross Bore: 2-1/8"
• Edge Bore: 1"
• Door Thickness: 1-3/8" to 1-3/4"
• Handing: Reversible Left or Right
• Handle Length: 4"
• Handle Height: 2-5/8"
• Handle Projection: 1-7/8"
• Trim Width: 2-5/8"
• Trim Height: 2-5/8"
• Product Weight: 1.79 lbs.
• Latch Faceplate: Round Corner