Craftmade Pavillion 44" - 56" 5 Blade Indoor / Outdoor Ceiling Fan - Remote and Light Kit Included - Requires Blade Selection

 

Craftmade Pavilion Indoor / Outdoor Fan

Inside or out, the casual style of the damp-rated Pavilion ceiling fan is sure to please. Each ceiling fan comes complete with a heavy-duty 3-speed reversible motor, integrated light kit, remote and wall controls, and Limited Lifetime Warranty. Available in Aged Textured Bronze or Antique White Distressed – Pavilion also comes with a matching finish Blank-Out Hub for non-light use.

Included Components:

• 4" and 6" Downrods
• Integrated Light Kit
  • 2 x 60 Watt Candelabra Bulbs Included
• Remote and Wall Controls

Features:

• Lifetime Limited Warranty
• Dual Mount
  • Compatible on Flat or Sloped Ceilings (Up to 35°)
• Remote control
• Suitable for Indoor or Outdoor Use

Blade Specifications:

• Blade Span: 44" - 52" (Depending on blade selection)
• Number of Blades: 5
• Blades Included: No

Motor Specifications:

• Amperage: 0.7 A
• Motor Type: AC Induction
• 188mm x 15mm
• Reversible Motor: Yes
• CFM (High): 6149
• RPM (High): 210
• Voltage: 120 V

Sloped Ceiling Specifications:

• For ceilings with slope from 35° to 45°, use the 45AD angled ceiling adapter

High or Low Ceiling Specifications:

• The Pavilion is designed for installation on standard 8 to 9 foot ceilings. If your ceiling is higher, you'll need to purchase an additional downrod. The rule of thumb is that ceiling fans should have a minimum of 7 feet and a maximum of 9 feet of clearance between the bottom of the fan and the floor in order to circulate air efficiently. If you have a low ceiling, purchase the CMA flush mount adapter to reduce the hanging height of your fan.

Suggested Downrod Lengths:

• 9 Foot Ceiling: 6" - 12"
• 10 Foot Ceiling: 12" - 18"
• 11 Foot Ceiling: 18" - 24"
• 12 Foot Ceiling: 24" - 36"
• 13 Foot Ceiling: 36" - 48"
• 14 Foot Ceiling: 48" - 60"
• 15 Foot Ceiling: 60" - 72"
• For ceiling heights greater than 15 feet, you'll need to purchase the downrod Coupler to join two downrods together.