Schlage Double Cylinder Addison Handleset with Plymouth Interior Knob from the F-Series

Two keys will be shipped per lock. Three or more items keyed alike will ship a total of 6 keys

Double Cylinder Function: Schlage double cylinder handlesets require a key to unlock the mechanism on both the interior and exterior sides of the door. Double cylinder locks can pose a safety hazard in times of emergency due to requiring a key to unlock from the inside; please check local codes before installing.

• Addison double cylinder handle set with Plymouth Interior Knob
• The deadbolt is thrown or retracted by a key from either side.
• Door latch is retracted by a thumb piece from the outside or by the inside lever
• Bolt automatically deadlocks when it is fully thrown.
• Installation should be in accordance with existing codes only, to ensure life safety emergency egress.
• For Right or Left handed applications
• Solid Brass Exterior Trim
• Wrought Brass Interior Trim
• Lifetime Limited Mechanical and Finish Warranty
• Exterior Handleset Height: 12-7/16"without the deadbolt
• Exterior Handle Projection: 3-3/16"
• Interior Knob Diameter: 2-1/8"
• Interior Rose Diameter: 2-3/4"
• Interior Knob Projection: 2-7/8"
• Faceplates (Part 12-326): Supplied with 1/4" Round Corner, Square Corner and Drive-In Faceplates
• Strike Plates (Part 10-269): Supplied with a Round Corner Deadbolt Strike (10-116), Square Corner Full Lip Strike Plate (10-026) and Round Corner Full Lip Strike Plate (10-027) with Dimensions of 2-1/4" x 1-5/8"