Little Giant 63 GPH Small Submersible Statuary Fountain Pump

63 GPH Small Submersible Statuary Fountain Pump

These epoxy-encapsulated pumps, commonly referred to as "potted pumps", feature an epoxy-encapsulated motor, plastic housing, and radial lip seal on the motor shaft. The PES model pumps must be operated in clean fresh water with the volute intake below the liquid level.

This wet-rotor pump, often referred to as a magnetic-drive pump by other manufacturers, utilizes an epoxy-encapsulated motor and plastic housing. A permanent magnet is attached to the impeller. The magnet acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor, thus the term "wet-rotor". It is seal-less and oil-less. This pump works well in water garden, statuary and some industrial applications. It is compact in design and is the most energy efficient type of pump Little Giant manufactures. The other side of this efficiency is very little starting torque. Therefore, the pump does not produce as much pressure and will not pump water as high as its epoxy-encapsulated, direct-drive counterpart.

• Compact design
• Energy efficient
• Built-in flow control
• 63 gallons per hour (GPH)
• 2.1-foot maximum lift
• 5 watts
• 6-foot cord
• Discharge accepts 1/2" or 3/8" I.D. tubing