General Pump General Pump Series 51 2500 PSI 2.88 GPM (3/4" Shaft) Triplex Pressure Washer Pump w/ Unloader & Injector

Product Information:

• High Quality Replacement For Worn Out Pumps
  • Consumer grade is ideal for all general cleaning applications
  • Comes standard with SAE J609 gasoline engine mounting flange
  
  
• Triplex Plunger Pump With Ceramic Plungers
  • Runs cooler and lasts longer than axial pumps
  • Continuously lubricated packings extend time between rebuilds
  
  
• Durable Components Fit Left Handed Mounts
  • Forged brass manifold lasts longer than aluminum
  • Oversized connecting rods increase performance
  • Stainless steel inlet and outlet valves won't corrode
  
  
• Easily Connects To Many Gas Pressure Washers
  • 3/4" / 19mm hollow shaft; fits left handed mounts
  • Pump inlet port thread 3/8-19 BSPP-F
  • Unloader inlet port thread 1/2-14 BSPP-F**
  • Pump discharge port thread 1/4-19 BSPP-F
  • Unloader discharge port thread 3/8-19 BSPP-M
  • Bore .591 in. / 15 mm, stroke .283 in. / 7.2 mm
  • **Do not use NPT inlet fitting
  
  
• Be Sure To Measure The Shaft & Flange Bolt Holes Accurately!
  • There is a 25% restock fee on returned pumps
  • See the Owner's Manual (under the Specs tab) for dimensions
  • Pump ships bare so you'll need to re-use your connectors & siphon tube or purchase them separately
  
  
• Please Call Us For Sizing Assistance w/ Information Below:
  • 1. Age of Pump and Model # (must be no more than 15-yrs old)
  • 2. Is the pump Vertical or Horizontal
  • 3. Shaft Size - 3/4", 7/8" (vertical ONLY), 1", or Belt Drive XXmm
  • 4. Engine Brand and HP (model # if available would be helpful)
  
  
• ***Shaft Size Measurements Must Be Precise***

Specifications:

• CARB Approved
• Warranty: 5 Year Commercial and 5 Year Consumer

Dimensions:

• Height: 8"
• Width: 5-1/2"
• Length: 7"
• Product Weight: 11.4 lbs