Skip to main content
Shipping to:Chico, CA

My Projects

Projects

Menu

Account

My Projects

Projects

Call

(866) 618-9274

Cart

Shipping to:Chico, CA
General Pump
General Pump General Pump Fully Plumbed Made Ready 2610 PSI 3.3 GPM (3/4" Shaft) Triplex Pressure Washer Pump N/A

General Pump General Pump Fully Plumbed Made Ready 2610 PSI 3.3 GPM (3/4" Shaft) Triplex Pressure Washer Pump

Model: PMRET1507G6
|
Item: bci5129434

$486.63
Special Order
placeholder
Free Shipping!
Leaves the Warehouse in 4 to 6 weeks
-
Return & Shipping Details

Details

Product Information:

  • Direct Drive Fully Plumbed ET1507G6 Replacement Pump
    • Fully Plumbed and ready to go - 4 bolts off - 4 bolts on
    • Comes with unloader, pressure relief valve, pressure washer hose plug, and garden hose inlet w/ filter

  • 3/4-Inch Hollow Shaft w/ Gas Flange
    • Provides a smooth liquid flow at 3400 RPM
    • Oversized crankcase with one-piece plunger design eliminates water entering crankcase

  • Offers Maximum 2610 PSI & 3.3 GPM
    • Heavy-duty advanced nickel-plated cast manifold
    • Solid ceramic plungers with dust protection chamber
    • Rated for a maximum 125 PSI and 165-degree temperature

  • Pulsar EZ Unloader
    • Adjust the pressure to suit the task at hand
    • Eliminates back pressure when pulling a manual start engine

  • External Bypass Hose
    • Carries water to the inlet when the unloader valve opens
    • Adds safety if water circulates in pump for too long and quickly heats to dangerous temperatures

  • Be Sure To Measure Flange Bolt Holes & Shaft Accurately!
    • There is a 25% restocking fee on returned pumps
    • See the Owner's Manual (under the Specs tab) for dimensions
    • Pumps should not be allowed to operate in bypass mode for more than 1 minute

  • Please Call Us For Sizing Assistance w/ Information Below:
    • 1. Age of Pump and Model # (must be no more than 15-yrs old)
    • 2. Is the pump Vertical or Horizontal
    • 3. Shaft Size - 3/4", 7/8" (vertical ONLY), 1", or Belt Drive XXmm
    • 4. Engine Brand and HP (model # if available would be helpful)

  • ***Shaft Size Measurements Must Be Precise***

Specifications:

  • CARB Approved
  • Warranty: 5 Year Commercial and 5 Year Consumer

Dimensions:

  • Height: 8-13/16"
  • Width: 13-3/8"
  • Length: 7-1/2"
  • Product Weight: 15 lbs
  • Outflow Connection: 3/8" Snap Coupler (Female)

Specifications

Reviews

(2)
4.5 out of 5 Stars

Questions & Answers

Matching Products