General Pump General Pump Series 63 3000 PSI 4 GPM (Solid Shaft) Triplex Pressure Washer Pump (Belt Drive)

Product Information:

• High Quality Replacement For Worn Out Pumps
  • Commercial grade is ideal for all general cleaning applications
  • Flex coupling and bell housing available for direct drive
  
  
• Triplex Plunger Pump With Solid White Ceramic Plungers
  • Runs cooler and lasts longer than axial pumps
  • Next generation packings for exceptional seal life
  
  
• 63 Series General Pump
  • Strongest, heaviest manifold on market (in this pump level)
  • Fully anodized crankcase offers better protection against elements
  
  
• Oversized Connecting Rods: Can handle up to 3400 RPM


• .945 in / 24 mm Hollow Shaft: Inlet port thread 1/2 - 14 BSPP-F


• Discharge port thread 3/8 - 19 BSPP-F
  • Maximum fluid temperature 165 degrees F
  • Bore .591 in. / 15 mm, stroke .315 in. / 8mm
  • 14 ounce oil capacity
  
  
• Be Sure To Measure The Shaft & Flange Bolt Holes Accurately!
  • There is a 25% restock fee for returned pumps
  • See the Owner's Manual (under the Specs tab) for dimensions
  • Pump ships bare so you'll need to re-use your connectors & siphon tube or purchase them separately
  • This is a bare pump; you will need to re-use your current fittings or purchase new ones (sold separately)
  
  
• Please Call Us For Sizing Assistance w/ Information Below:
  • 1. Age of Pump and Model # (must be no more than 15-yrs old)
  • 2. Is the pump Vertical or Horizontal
  • 3. Shaft Size - 3/4", 7/8" (vertical ONLY), 1", or Belt Drive XXmm
  • 4. Engine Brand and HP (model # if available would be helpful)
  
  
• ***Shaft Size Measurements Must Be Precise***

Specifications:

• CARB Approved
• Warranty: 5 Year Commercial and 5 Year Consumer

Dimensions:

• Height: 4-13/16"
• Width: 8-5/16"
• Length: 8-3/8"
• Product Weight: 19 lbs