California Air Tools 2 HP 10 Gal Steel Tank 125 Max PSI Single-Stage Portable Electric (230 Volt) Reciprocating Air Compressor

 

Product Information:

• Powerful 2-HP SP-Series 200-Volt 1-Phase Motor
  • Low 1680 RPM creates less noise & wear
  • 70 dBA is ideal for indoor use where noise is an issue
• Oil-Free Dual Piston Pump System
  • 6.4 CFM @ 40 PSI; 5.3 CFM @ 90 PSI; 125 PSI maximum
  • Works in a variety of temperatures and uneven terrains
  • 3000+ hour life cycle before wear; comparable units are 500 hours or less
• 10 Gallon Steel Air Tank With Wheel Kit: Easy to move around the jobsite, shop or garage


• Easy-Start Valve & Two Air Filters: Cleaner air for better tool operation


• Designed For Increased Duty Cycles & Run Times
  • Time to fill tank from empty to full - 120 Seconds
  • Recovery time from 95 PSI to 125 PSI - 25 Seconds
• Top Mounted Controls & Condor Pressure Switch
  • Dual gauges so you can check tank & tool pressure at a glance
  • Two 1/4" air outlets with quick connectors for fast tool changes
• Thermal Overload Protector: 7 Amp low amp draw works on NEMA 6-15P outlets


 

 

Specifications:

• Fuel Type: Electric
• Height: 35-7/8"
• Width: 15-1/8"
• Length: 16"
• Product Weight: 82.5 lbs
• Warranty: 1 Year Commercial and 1 Year Residential

Included Accessories:

• Pressure Gauge Included
• Pressure Regulator Included
• Filter Included

Tank Specifications:

• Tank Outlet Size: 1/4"
• Tank Size: 10

Pump Specifications:

• Lubrication Type: Oil Free
• CFM: 5
• Drive Type: Direct Drive

Engine and Motor Specifications:

• Horsepower: 2 HP
• Amperage: 7A
• dB Rating: 70
• Voltage: 230V
• Voltage: 230V